The Blenheim

Internal Fire Door Set

POA inc VAT

The Blenheim is an internal shaker door set using inset panels a lamb’s tongue moulding. With the option to have bespoke mouldings created to match existing or preferred styles making them perfect for your new or refurbishment project.

Lovingly and meticulously handmade using Tulipwood and MDF inset panels, the doors can be rated from Non-Fire Rated, FD30 and FD60 Fire Resistance. We can even lower their acoustic levels.

To achieve the standards required for fire rating we use the Mann McGowan Palusol SW System Core which allows for original features to be maintained where other cores cannot achieve.

All our door sets have been tested in accordance with the principles of BS476 Part 22:1987 and meet Global Assessment standards.

Love your Oxford Fire Door and you will be the proud owner of a very high quality and long-lasting door set.

Bespoke door requests are welcome, we can also accommodate ‘Acoustic’ and Fire Rated Acoustic Doors’.

The Shilton is an internal shaker door set using inset panels a lamb’s tongue moulding. With the option to have bespoke mouldings created to match existing or preferred styles making them perfect for your new or refurbishment project.

Lovingly and meticulously handmade using Tulipwood and MDF inset panels, the doors can be rated from Non-Fire Rated, FD30 and FD60 Fire Resistance. We can even lower their acoustic levels.

To achieve the standards required for fire rating we use the Mann McGowan Palusol SW System Core which allows for original features to be maintained where other cores cannot achieve.

Other woods such as American Black Walnut, Ash, European Walnut, Oak, etc and finishes and glazing can be requested, as standard all are supplied as complete door sets including frame, pre-hung with intumescent seals and pads in the frame and door as appropriate with fire rated hinges were required.

Ironmongery can be supplied via us at Oxford Fire Doors or you can supply and we will cut out and pre-fit, we just need to ensure they meet the standards matching fire rated requirements. At all points we can advise on the best solution.

Because we want to ensure the final finish is the very best, door sets are supplied primed in a water based white primer ready for site painting.

A range of sizes are available and bespoke also considered.

All our door sets have been tested in accordance with the principles of BS476 Part 22:1987 and meet Global Assessment standards.

Because BS 476 is being withdrawn updated certification for the Palusol SW Panels has now been completed and the final stages of the assessment being finalised, because projects often take 3 months or more don’t hesitate in sending your enquiries in.

Love your Oxford Fire Door and you will be the proud owner of a very high quality and long-lasting door set.

Species:
Oak, Maple, Beech, Walnut, Sapele, Ash.

Finishes:
Primed, Unprimed, *French Polish, *Lacquer Finish, *Oiled, *Other (*contact us)

Wood type density:
Minimum ‘softwood’ at 510kg/m3

Species/Types that maybe used:
Softwood/Hardwood, Palusol SW HDF Laminated Board, MDF, Chipboard, Plywood, Timber.

Panel Details:
Flat Panelled, Raised and Fielded, Bespoke moulding available POA.
1-10 solid panels can be used subject to frame requirements, including Raised and Fielded.

Glazing:
Fire Rated (FD30 and FD60) and Non-Fire rated available. 2-10 Panels may be used but maximum glazing coverage 0.7m2 when using a combination of glazed and panelled areas.*Pattern 10 not covered.

Fire Rated Sizing:
Range of options available at 45mm and 54mm.

Core:
Mann McGowan Palusol SW Fire Rated Core Laminated board designed for fire resistant doors in flat or raised and field designs. Palusol®SW4

Minimum Frame:
70mm x 32mm

Glazed Fan Light:
Single & Double Door Set: <600mm height / overall door width. Joints:
Mortise and Tenon Joint.

Mann McGowan and BASF SE are a quality assured companies in accordance with ISO 9001: 2015
BASF SE Implements and maintains an environmental system in accordance with ISO 14001: 2004

Testing:
BS476 Part 22:1987 and meet Global Assessment standards, tests carried out by Chiltern International Fire in accordance with BS 476 Part 22: 1987 have culminated in two global assessments Chiltern A0 9136 and A0 9165.

Because BS 476 is being withdrawn updated certification for the Palusol SW Panels has now been completed and the final stages of the assessment being finalised, because projects often take 3 months or more don’t hesitate in sending your enquiries in.

Additional materials:
Intumescent components including seals, hinges, and pads, (latch lock, fire resistant glazing system as appropriate).

Core Dimensions:
2160mm x 1110mm x 10mm cut down to correct sizing. (10mm FD30 or 20mm FD60) SW4

Sizing:

Raised & Fielded FD30 Raised and Fielded Panelled Door sets Latched and Unlatched Single and Double Acting Single Door sets:
Leaf Size: (LSASD) H2100 – 2565 x W1127 x 915
Leaf Size: (ULSASD / DASD) H2100 – 2515 x W1102 – 915
Over Panels max height: Single Door Set: 800mm
Head: 20x4mm centrally fitted in the leaf or frame reveal. Leaves over 2350mm high increase application to 25x4mm.
Jambs: 15x4mm centrally fitted in leaf or frame reveal.
Panel Edges: 18x2mm around edges in bottom of framing groove.

Raised and Fielded FD30 Raised and Fielded Panelled Door sets Latched and Unlatched Single and Double Door sets:
Leaf Size: (LSADD) H2100 – 2465 x W1077 x 915
Leaf Size: (ULSADD / DADD) H2100 – 2415 x W1052 – 915
Over Panels max height: Double Door Set: 500mm
Head: 20x4mm centrally fitted in leaf or frame reveal. Leaves over 2350mm high increase specification to 25x4mm.
Meeting Edges: 10x4mm centrally fitted in one leaf and 2 No. 10x4mm each side of the centreline in opposing leaf.
Jambs: 15x4mm centrally fitted in leaf or frame reveal.
Panel Edges: 18x2mm around all edges in bottom of the framing groove.

Flat Panelled FD30 Door sets Latched and Unlatched Single and Double Acting Single Door sets:
Leaf Size: (LSASD) H2100 – 2313 x W1017 – 915
Leaf Size: (ULSAD / DASD) H2100 – 2263 x W992 – 915
Over Panels max height: 800mm
Head: 20x4mm centrally fitted in the leaf or frame reveal.
Jambs: 15x4mm centrally fitted in leaf or frame reveal.
Panel Edges: 10x2mm around edges in bottom of framing groove.

Flat Panelled FD30 Door sets latched and Unlatched Single and Double Acting Double Door sets:
Leaf Size: (LSADD) H2100 – 2213 x W967 – 915
Leaf Size: (ULSADD / DADD) H2100 – 2163 x W942 – 915
Over Panels max height: 500mm
Head: 20x4mm centrally fitted in the leaf or frame reveal.
Meeting Edges: 10x4mm centrally fitted in one leaf and 2 No. 10x4mm each side of the centreline in opposing leaf.
Jambs: 15x4mm centrally fitted in leaf or frame reveal.
Panel Edges: 10x2mm around edges in bottom of framing groove.

Acoustic:
Available – Acoustically tested in accordance with BS EN ISO 10140-2: 2010 (Drop Down deals can be specified).

The Burswin Glazed

The Burswin Glazed

POA inc VAT 2 Panel Burswin Glazed 4 Panel Style Quadrant Moulding and Square Edge lower panels. Ideal for a hallway or kitchen door when you want maximum light. Suitable for internal use only. (Door set only FD30 or Door only NFR) The Burswin is an internal shaker...

The Burswin Half Glazed

The Burswin Half Glazed

POA inc VAT 2 Panel Burswin Half Glazed Quadrant Moulding and 2 Square Edge lower panels. Ideal for a hallway or kitchen door when you want maximum light. Suitable for internal use only. (Door set only FD30 or Door only NFR) The Burswin is an internal shaker door set...

The Shilton

The Shilton

POA inc VAT The Shilton is an internal shaker door set using inset panels a lamb’s tongue moulding. With the option to have bespoke mouldings created to match existing or preferred styles making them perfect for your new or refurbishment project. Lovingly and...

The Burswin

The Burswin

POA inc VAT The Burswin is an internal shaker door set making a simple clean statement with square shoulders and inset panels making them perfect for your new or refurbishment project. Lovingly and meticulously handmade using Tulipwood and MDF inset panels, the doors...